﻿<metadata>
  <idinfo>
    <citation>
      <citeinfo>
        <origin>Barrett A. Garrison, California Department of Fish and Game, North Central Region</origin>
        <pubdate>20070718</pubdate>
        <title>Tree Habitat - Spears and Didion Ranches [ds321]</title>
        <geoform>vector digital data</geoform>
        <onlink>http://bios.dfg.ca.gov</onlink>
        <onlink>ftp://ftp.dfg.ca.gov/BDB/GIS/BIOS/Public_Datasets/300_399/ds321.zip</onlink>
      </citeinfo>
    </citation>
    <descript>
      <abstract>These data are the summary statistics calculated for trees and snags from the three 0.05-ha circular plot habitat samples taken in 2005 each at the 15 sample points at Spears and Didion Ranches, Placer County, California. There were three 0.05-ha circular habitat sampling plots at each of the 15 sample points. To be counted, trees had to be &gt; 4" dbh and within the 12.6 m radius plot, while snags had to be &gt; 4" dbh and &gt; 9.8 ft tall and within the plot.</abstract>
      <purpose>These data are intended to represent baseline data for wildlife communities and habitat conditions in these parks. They can be used to assess and monitor the park's ecological viability and sustainability.</purpose>
      <supplinf>For more information on how this sampling component fits into the sampling scheme used on the Spears and Didion Ranch Parks project, see the the following documents: Garrison, B.A. May 2004. "Sierra Nevada Foothill Vegetation-Habitat Study, Habitat Sampling Protocols." Resource Assessment Program, Central Sierra Region, Calif. Dept. of Fish and Game, Rancho Cordova, CA. 4pp. These reports can be accessed at https://nrmsecure.dfg.ca.gov/documents/ContextDocs.aspx?cat=BIOS&amp;sub=ds316 . "Sierra Nevada Foothill Wildlife, Habitat Sampling Datasheet." Resource Assessment Program, Central Sierra Region, Calif. Dept. of Fish and Game, Rancho Cordova, CA. 3pp. including methods. These reports can be accessed at https://nrmsecure.dfg.ca.gov/documents/ContextDocs.aspx?cat=BIOS&amp;sub=ds316 .</supplinf>
    </descript>
    <timeperd>
      <timeinfo>
        <sngdate>
          <caldate>20050101</caldate>
        </sngdate>
      </timeinfo>
      <current>ground condition</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>As needed</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-121.208593</westbc>
        <eastbc>-121.165681</eastbc>
        <northbc>38.975919</northbc>
        <southbc>38.958581</southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>None</themekt>
        <themekey>tree numbers</themekey>
        <themekey>snags</themekey>
        <themekey>Placer Legacy Program</themekey>
        <themekey>Tree density</themekey>
        <themekey>Quadratic Mean Density</themekey>
        <themekey>conifers</themekey>
        <themekey>size distribution</themekey>
        <themekey>hardwoods</themekey>
        <themekey>basal area</themekey>
        <themekey>tree size</themekey>
      </theme>
      <theme>
        <themekt>ISO 19115 Topic Category</themekt>
        <themekey>biota</themekey>
        <themekey>environment</themekey>
      </theme>
      <place>
        <placekt>None</placekt>
        <placekey>California</placekey>
        <placekey>Didion Ranch</placekey>
        <placekey>Placer County</placekey>
        <placekey>Sierra Nevada foothills</placekey>
        <placekey>Spears Ranch</placekey>
        <placekey>Coon Creek</placekey>
      </place>
    </keywords>
    <accconst>Public use.</accconst>
    <useconst>These data can be used without constraints.</useconst>
    <ptcontac>
      <cntinfo>
        <cntorgp>
          <cntorg>California Department of Fish and Game, North Central Region</cntorg>
          <cntper>Barrett A. Garrison</cntper>
        </cntorgp>
        <cntvoice>916 358 2945</cntvoice>
        <cntemail>bgarrison@dfg.ca.gov</cntemail>
      </cntinfo>
    </ptcontac>
    <native>Microsoft Windows 7 Version 6.1 (Build 7601) Service Pack 1; Esri ArcGIS 10.3.1.4959</native>
  </idinfo>
  <dataqual>
    <attracc>
      <attraccr>It is assumed that the locations of the survey points are accurate with regard to the actual locations on the ground where the surveys were done. It is assumed that these species were accurately identified, counted, measured, and summarized.</attraccr>
    </attracc>
    <complete>All vegetation-habitat sampling occurred at 3-circular plots around each of the 15 sample points in the project area. During data compilation the coordinates of the centers of 4-plots (3-2, 11-3, 12-3, and 14-1) were lost and are not shown when this data layer is displayed. However, the attribute data for these points exist in the database and are available for analysis if the exact point is not required (Contact the Data Distributor). See the linked referenced protocols and data sheet in these metadata to evaluate the how the missing coordinates might affect any further analysis of these data</complete>
    <lineage>
      <procstep>
        <procdesc>Permanently joined extended table contents into shapefile.</procdesc>
        <procdate>20090702</procdate>
        <proccont>
          <cntinfo>
            <cntorgp>
              <cntorg>California Department of Fish and Game</cntorg>
              <cntper>Greg Ewing</cntper>
            </cntorgp>
            <cntemail>bios@dfg.ca.gov</cntemail>
          </cntinfo>
        </proccont>
      </procstep>
    </lineage>
  </dataqual>
  <spdoinfo>
    <direct>Vector</direct>
    <ptvctinf>
      <sdtsterm>
        <sdtstype>Entity point</sdtstype>
        <ptvctcnt>41</ptvctcnt>
      </sdtsterm>
    </ptvctinf>
  </spdoinfo>
  <spref>
    <horizsys>
      <planar>
        <mapproj>
          <mapprojn>NAD 1983 California Teale Albers</mapprojn>
          <albers>
            <stdparll>34.0</stdparll>
            <stdparll>40.5</stdparll>
            <longcm>-120.0</longcm>
            <latprjo>0.0</latprjo>
            <feast>0.0</feast>
            <fnorth>-4000000.0</fnorth>
          </albers>
        </mapproj>
        <planci>
          <plance>coordinate pair</plance>
          <coordrep>
            <absres>0.000000003754707655900803</absres>
            <ordres>0.000000003754707655900803</ordres>
          </coordrep>
          <plandu>meter</plandu>
        </planci>
      </planar>
      <geodetic>
        <horizdn>D North American 1983</horizdn>
        <ellips>GRS 1980</ellips>
        <semiaxis>6378137.0</semiaxis>
        <denflat>298.257222101</denflat>
      </geodetic>
    </horizsys>
  </spref>
  <eainfo>
    <detailed>
      <enttyp>
        <enttypl>ds321</enttypl>
      </enttyp>
      <attr>
        <attrlabl>FID</attrlabl>
        <attrdef>Internal feature number.</attrdef>
        <attrdefs>ESRI</attrdefs>
        <attrdomv>
          <udom>Sequential unique whole numbers that are automatically generated.</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Shape</attrlabl>
        <attrdef>Feature geometry.</attrdef>
        <attrdefs>ESRI</attrdefs>
        <attrdomv>
          <udom>Coordinates defining the features.</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>LATDD</attrlabl>
        <attrdef>Latitude in decimal degrees using NAD83.</attrdef>
      </attr>
      <attr>
        <attrlabl>LONDD</attrlabl>
        <attrdef>Longitude in decimal degrees using NAD83.</attrdef>
      </attr>
      <attr>
        <attrlabl>POINT_PLOT</attrlabl>
        <attrdef>The sample point identification number followed by the vegetation plot identification number.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_TREES</attrlabl>
        <attrdef>Number of live trees counted in the 0.05-ha circular plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_DBH_TR</attrlabl>
        <attrdef>Average diameter at breast height (4.5 ft) of the live trees within the plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_HT_TRE</attrlabl>
        <attrdef>Number of trees sampled in the plot for measurements of tree heights.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_HT_TRE</attrlabl>
        <attrdef>Average height of the trees measured in the plots.</attrdef>
      </attr>
      <attr>
        <attrlabl>QMD_TREE</attrlabl>
        <attrdef>Average quadratic diameter at breast height (4.5 ft) of the number of trees within the plot.  Quadratic diameter is calculated by dividing the (1) square of the sum of the squared diameters of the sample trees by (2) the total number of trees in the sample.</attrdef>
      </attr>
      <attr>
        <attrlabl>TREES_AC</attrlabl>
        <attrdef>The total number of trees per acre; this is calculated by multiplying the number of trees in the sample by 8.1 to expand the number to the number per acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>TREE_BA_AC</attrlabl>
        <attrdef>Basal area (BA) (square feet of trees) per acre.  This is calculated by summing the total cross-sectional area of the trees in the plot (square feet diameter) by 8.1 to expand the number to an acre. </attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_HWD</attrlabl>
        <attrdef>Number of live hardwood trees counted in the 0.05-ha circular plot.  The hardwoods are oaks and other trees with leaves.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_DBH_HW</attrlabl>
        <attrdef>Average diameter at breast height (4.5 ft) (inches) of the  hardwood trees within the plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_HT_HWD</attrlabl>
        <attrdef>Number of hardwood trees sampled in the plot for measurements of tree heights.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_HT_HWD</attrlabl>
        <attrdef>Average height (ft) of the hardwood trees measured in the plots.</attrdef>
      </attr>
      <attr>
        <attrlabl>QMD_HWD</attrlabl>
        <attrdef>Average quadratic diameter at breast height (4.5 ft) (inches) of the hardwood trees within the plot.  Quadratic diameter is calculated by dividing the (1) square root of the sum of the squared diameters of the sample trees by (2) the total number of trees in the sample.</attrdef>
      </attr>
      <attr>
        <attrlabl>HWD_AC</attrlabl>
        <attrdef>The total number of hardwood trees per acre; this is calculated by multiplying the number of trees in the sample by 8.1 to expand the number to the number per acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>HWD_BA_AC</attrlabl>
        <attrdef>Basal area (BA) (square feet of trees) per acre of hardwood trees.  This is calculated by summing the total cross-sectional area of the trees in the plot (square feet diameter) by 8.1 to expand the number to an acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_CONIF</attrlabl>
        <attrdef>Number of conifer trees sampled in the plot for measurements of tree heights.  Conifers are pines, cedars, and other evergreen trees with needles.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_DBH_CO</attrlabl>
        <attrdef>Average diameter at breast height (4.5 ft) (inches) of the conifer trees within the plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_HT_CON</attrlabl>
        <attrdef>Number of conifer trees sampled in the plot for measurements of tree heights.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_HT_CON</attrlabl>
        <attrdef>Average height (ft) of the conifer trees measured in the plots</attrdef>
      </attr>
      <attr>
        <attrlabl>QMD_CONIF</attrlabl>
        <attrdef>Average quadratic diameter at breast height (4.5 ft) (inches) of the conifer trees within the plot.  Quadratic diameter is calculated by dividing the (1) square root of the sum of the squared diameters of the sample trees by (2) the total number of trees in the sample.</attrdef>
      </attr>
      <attr>
        <attrlabl>CONIFER_AC</attrlabl>
        <attrdef>The total number of conifer trees per acre; this is calculated by multiplying the number of trees in the sample by 8.1 to expand the number to the number per acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>CONF_BA_AC</attrlabl>
        <attrdef>Basal area (BA) (square feet of trees) per acre of conifer trees.  This is calculated by summing the total cross-sectional area of the trees in the plot (square feet diameter) by 8.1 to expand the number to an acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>NUM_SNAGS</attrlabl>
        <attrdef>Number of snags counted in the 0.05-ha circular plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>AVE_DBH_SN</attrlabl>
        <attrdef>Average diameter at breast height (4.5 ft) of the snags within the plot.</attrdef>
      </attr>
      <attr>
        <attrlabl>QMD_SNAGS</attrlabl>
        <attrdef>Average quadratic diameter at breast height (4.5 ft) of the snags within the plot.  Quadratic diameter is calculated by dividing the (1) square root of the sum of the squared diameters of the sample trees by (2) the total number of trees in the sample.</attrdef>
      </attr>
      <attr>
        <attrlabl>SNAGS_AC</attrlabl>
        <attrdef>The total number of snags per acre; this is calculated by multiplying the number of snags in the sample by 8.1 to expand the number to the number per acre.</attrdef>
      </attr>
      <attr>
        <attrlabl>SNAG_BA_AC</attrlabl>
        <attrdef>Basal area (BA) (square feet of snags) per acre of the snags.  This is calculated by summing the total cross-sectional area of the snags in the plot (square feet diameter) by 8.1 to expand the number to an acre.</attrdef>
      </attr>
    </detailed>
    <overview>
      <eaover>The data contained in the extended table describes tree sizes, densities, and number by conifers, hardwoods, snags.  It also provides summarized data on Quadratic Mean Densities and basal area.</eaover>
    </overview>
  </eainfo>
  <distinfo>
    <distrib>
      <cntinfo>
        <cntorgp>
          <cntorg>Biogeographic Data Branch, California Department of Fish and Game</cntorg>
          <cntper>Gordon Gould</cntper>
        </cntorgp>
        <cntvoice>916 445 5006</cntvoice>
        <cntemail>ggould@dfg.ca.gov</cntemail>
      </cntinfo>
    </distrib>
    <distliab>Neither the State of California nor the California Department of Fish and Game warrant the correctness or accuracy of the observation data presented in here. They are used at the user's own risk.</distliab>
    <stdorder>
      <fees>None</fees>
      <ordering>Contact Distributor</ordering>
      <turnarnd>1-2 weeks</turnarnd>
    </stdorder>
  </distinfo>
  <metainfo>
    <metd>20160229</metd>
    <metc>
      <cntinfo>
        <cntorgp>
          <cntorg>Biogeographic Data Branch, California Department of Fish and Game</cntorg>
          <cntper>Gordon Gould</cntper>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing</addrtype>
          <address>1416 Ninth St., 12th floor</address>
          <city>Sacramento</city>
          <state>CA</state>
          <postal>95814</postal>
        </cntaddr>
        <cntvoice>916 445 5006</cntvoice>
        <cntemail>ggould@dfg.ca.gov</cntemail>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standard for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
    <mettc>local time</mettc>
  </metainfo>
</metadata>